NAP 360 Capture Pilehylde Kit

Pris: DKK 95,00

Varenummer: 48873

På lager

Repair kit for the NAP Quik Tune 360 Capture rest that includes 1 main launcher, 2 arms with the brushes attached and 2 screws.

Tuning with the QT 360
When getting the QT360 ready to shoot, always remember to setup your nock point about 1/8? high. This is the recommended position used for any NAP rest on a modern cam bow. We recommend using the paper tuning method to assure your arrow rest is set properly and the arrow is flying true as it leaves the bow. A nock high tear in the paper usually means that the rest needs to be lowered, or your nock point needs to be moved up slightly.
What arrow sizes work with the QT360?
Any hunting arrow will work great with the 360. Very slender target shafts (like an A/C/C 3L-18
Do the brushes ever wear out?
The brushes on the QT360 are designed to last for thousands of shots. One worn brush indicates a centershot adjustment needs to be made. If you notice one brush wearing more that another, adjust the horizontal adjustment towards the brush that shows more wear. Replacement parts are available through NAP.

Antal varer: 0

0,00

Fragt:

0,00

DANAGE of Scandinavia ApS
Industrivej 13
6310 Broager
Danmark
SE-NR. 14362975
Tlf: (+45) 74 44 26 36
Fax: (+45) 74 44 26 24
E-mail: danage@danage.dk

DANAGE of Scandinavia ApS • Industrivej 13 • 6310 Broager • E-mail: danage@danage.dk • Tlf.: 74 44 26 36 • Fax: 74 44 26 24 • CVR: 14362975